Can you run a Viridian RFX-45 on a 20 mm RIS or RIS II airsoft rail? Yes, through its ACRO-plate Picatinny mount. The Picatinny-pattern fit and the clone-rail tolerance to check.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Viridian RFX-45 on an airsoft RIS rail

Name: Fit a Viridian RFX-45 on an airsoft RIS rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Viridian RFX-45 is a Aimpoint ACRO / Steiner MPS optic. Here is how it clamps a 20 mm airsoft RIS rail and the one thing to check on a clone rail.

Direct fitThe Viridian RFX-45 runs on a 20 mm RIS or RIS II airsoft rail through its ACRO-plate Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.

OpticViridian RFX-45Aimpoint ACRO / Steiner MPS

seats on

RailAirsoft 20 mm RIS / RIS II railPicatinny-pattern; check clone tolerance

Fit readoutBench figures

Fitment

Optic type

enclosed-emitter reflex

Mount

ACRO-plate Picatinny mount

Mount the Viridian RFX-45 on airsoft

Shop Aimpoint ACRO / Steiner MPS Picatinny mount for airsoft on Amazonaffiliate Find Aimpoint ACRO / Steiner MPS Picatinny mount for airsoft on eBayaffiliate Shop Aimpoint ACRO / Steiner MPS riser mount on Amazonaffiliate Find Aimpoint ACRO / Steiner MPS riser mount on eBayaffiliate

A 20 mm RIS or RIS II airsoft rail is built to the Picatinny pattern, so the ACRO-plate Picatinny mount that carries the Viridian RFX-45 on a live-fire rail clamps the replica rail the same way. The footprint choice does not change: it is still a Aimpoint ACRO / Steiner MPS optic on a Aimpoint ACRO / Steiner MPS mount.

The variable on airsoft is the rail, not the sight. A quality RIS or RIS II rail holds Picatinny slot width and pitch, but a budget clone rail can run slightly narrow or wide. Seat the mount dry, check the Viridian RFX-45 sits square, and confirm the clamp locks before a skirmish so recoil-free cycling does not shake it loose.

Related fitments

›Viridian RFX-45 on a Picatinny railthe live-fire case
›Viridian RFX-45 footprint and mountthe optic
›Airsoft 20 mm RIS / RIS II railthe rail
›Aimpoint ACRO / Steiner MPS footprintthe pattern

Questions and answers

Fit a Viridian RFX-45 on an airsoft RIS rail?

The Viridian RFX-45 runs on a 20 mm RIS or RIS II airsoft rail through its ACRO-plate Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.