How to mount a Shield SIS2 on a Picatinny rail: it is a Shield RMSc enclosed-emitter reflex, so it takes a RMSc-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Shield SIS2 on a Picatinny rail

Name: Fit a Shield SIS2 on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Shield SIS2 is a Shield RMSc optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Shield SIS2 is a Shield RMSc enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.

OpticShield SIS2Shield RMSc

interface

MountRMSc-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

enclosed-emitter reflex

Mount the Shield SIS2

Shop Shield RMSc Picatinny mount on Amazonaffiliate Find Shield RMSc Picatinny mount on eBayaffiliate Shop Shield RMSc riser mount on Amazonaffiliate Find Shield RMSc riser mount on eBayaffiliate

The Shield SIS2 is cut to the Shield RMSc footprint. To put it on a Picatinny rail you fit a RMSc-footprint Picatinny mount: the mount carries the Shield RMSc pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Shield SIS2. Match the mount to the Shield RMSc pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Shield SIS2 footprint and mountthe optic
›Shield RMSc footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Shield SIS2 on a Picatinny rail?

The Shield SIS2 is a Shield RMSc enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.