How to mount a Shield RMS2 Glass Edition on a Picatinny rail: it is a Shield RMS open-emitter reflex, so it takes a Shield RMS-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Shield RMS2 Glass Edition on a Picatinny rail

Name: Fit a Shield RMS2 Glass Edition on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Shield RMS2 Glass Edition is a Shield RMS optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Shield RMS2 Glass Edition is a Shield RMS open-emitter reflex, so it mounts on a Picatinny rail through a Shield RMS-footprint mount. Buy the Shield RMS-footprint Picatinny mount, not a mount cut for any other footprint.

OpticShield RMS2 Glass EditionShield RMS

interface

MountShield RMS-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

open-emitter reflex

Note

the Shield RMS uses the RMS (not RMSc) hole spacing; match the mount to RMS

Mount the Shield RMS2 Glass Edition

Shop Shield RMS Picatinny mount on Amazonaffiliate Find Shield RMS Picatinny mount on eBayaffiliate Shop Shield RMS riser mount on Amazonaffiliate Find Shield RMS riser mount on eBayaffiliate

The Shield RMS2 Glass Edition is cut to the Shield RMS footprint. To put it on a Picatinny rail you fit a Shield RMS-footprint Picatinny mount: the mount carries the Shield RMS pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Shield RMS2 Glass Edition. Match the mount to the Shield RMS pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Shield RMS2 Glass Edition footprint and mountthe optic
›Shield RMS footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Shield RMS2 Glass Edition on a Picatinny rail?

The Shield RMS2 Glass Edition is a Shield RMS open-emitter reflex, so it mounts on a Picatinny rail through a Shield RMS-footprint mount. Buy the Shield RMS-footprint Picatinny mount, not a mount cut for any other footprint.