Can you run a Presma Mini Reflex on a 20 mm RIS or RIS II airsoft rail? Yes, through its Docter/Noblex-footprint Picatinny mount. The Picatinny-pattern fit and the clone-rail tolerance to check.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Presma Mini Reflex on an airsoft RIS rail

Name: Fit a Presma Mini Reflex on an airsoft RIS rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Presma Mini Reflex is a Docter / Noblex optic. Here is how it clamps a 20 mm airsoft RIS rail and the one thing to check on a clone rail.

Direct fitThe Presma Mini Reflex runs on a 20 mm RIS or RIS II airsoft rail through its Docter/Noblex-footprint Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.

OpticPresma Mini ReflexDocter / Noblex

seats on

RailAirsoft 20 mm RIS / RIS II railPicatinny-pattern; check clone tolerance

Fit readoutBench figures

Fitment

Optic type

open-emitter reflex

Mount

Docter/Noblex-footprint Picatinny mount

Mount the Presma Mini Reflex on airsoft

Shop Docter / Noblex Picatinny mount for airsoft on Amazonaffiliate Find Docter / Noblex Picatinny mount for airsoft on eBayaffiliate Shop Docter / Noblex riser mount on Amazonaffiliate Find Docter / Noblex riser mount on eBayaffiliate

A 20 mm RIS or RIS II airsoft rail is built to the Picatinny pattern, so the Docter/Noblex-footprint Picatinny mount that carries the Presma Mini Reflex on a live-fire rail clamps the replica rail the same way. The footprint choice does not change: it is still a Docter / Noblex optic on a Docter / Noblex mount.

The variable on airsoft is the rail, not the sight. A quality RIS or RIS II rail holds Picatinny slot width and pitch, but a budget clone rail can run slightly narrow or wide. Seat the mount dry, check the Presma Mini Reflex sits square, and confirm the clamp locks before a skirmish so recoil-free cycling does not shake it loose.

Related fitments

›Presma Mini Reflex on a Picatinny railthe live-fire case
›Presma Mini Reflex footprint and mountthe optic
›Airsoft 20 mm RIS / RIS II railthe rail
›Docter / Noblex footprintthe pattern

Questions and answers

Fit a Presma Mini Reflex on an airsoft RIS rail?

The Presma Mini Reflex runs on a 20 mm RIS or RIS II airsoft rail through its Docter/Noblex-footprint Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.