How to mount a Holosun EPS on a Picatinny rail: it is a Holosun EPS (full size) enclosed-emitter reflex, so it takes a RMSc-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Holosun EPS on a Picatinny rail

Name: Fit a Holosun EPS on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Holosun EPS is a Holosun EPS (full size) optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Holosun EPS is a Holosun EPS (full size) enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.

OpticHolosun EPSHolosun EPS (full size)

interface

MountRMSc-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

enclosed-emitter reflex

Mount the Holosun EPS

Shop Holosun EPS (full size) Picatinny mount on Amazonaffiliate Find Holosun EPS (full size) Picatinny mount on eBayaffiliate Shop Holosun EPS (full size) riser mount on Amazonaffiliate Find Holosun EPS (full size) riser mount on eBayaffiliate

The Holosun EPS is cut to the Holosun EPS (full size) footprint. To put it on a Picatinny rail you fit a RMSc-footprint Picatinny mount: the mount carries the Holosun EPS (full size) pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Holosun EPS. Match the mount to the Holosun EPS (full size) pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Holosun EPS footprint and mountthe optic
›Holosun EPS (full size) footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Holosun EPS on a Picatinny rail?

The Holosun EPS is a Holosun EPS (full size) enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.