How to mount a Holosun EPS Carry on a Picatinny rail: it is a Holosun K (modified RMSc) enclosed-emitter reflex, so it takes a RMSc-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Holosun EPS Carry on a Picatinny rail

Name: Fit a Holosun EPS Carry on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Holosun EPS Carry is a Holosun K (modified RMSc) optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Holosun EPS Carry is a Holosun K (modified RMSc) enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint mount (the Holosun K uses a modified RMSc cut). Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.

OpticHolosun EPS CarryHolosun K (modified RMSc)

interface

MountRMSc-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

enclosed-emitter reflex

Note

Holosun K is a modified RMSc; confirm the mount clears the K screw pattern

Mount the Holosun EPS Carry

Shop Holosun K (modified RMSc) Picatinny mount on Amazonaffiliate Find Holosun K (modified RMSc) Picatinny mount on eBayaffiliate Shop Holosun K (modified RMSc) riser mount on Amazonaffiliate Find Holosun K (modified RMSc) riser mount on eBayaffiliate

The Holosun EPS Carry is cut to the Holosun K (modified RMSc) footprint. To put it on a Picatinny rail you fit a RMSc-footprint Picatinny mount: the mount carries the Holosun K (modified RMSc) pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Holosun EPS Carry. Match the mount to the Holosun K (modified RMSc) pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Holosun EPS Carry footprint and mountthe optic
›Holosun K (modified RMSc) footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Holosun EPS Carry on a Picatinny rail?

The Holosun EPS Carry is a Holosun K (modified RMSc) enclosed-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint mount (the Holosun K uses a modified RMSc cut). Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.