How to mount a Bushnell MPO Pro-S on a Picatinny rail: it is a Shield RMSc open-emitter reflex, so it takes a RMSc-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Bushnell MPO Pro-S on a Picatinny rail

Name: Fit a Bushnell MPO Pro-S on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Bushnell MPO Pro-S is a Shield RMSc optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Bushnell MPO Pro-S is a Shield RMSc open-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.

OpticBushnell MPO Pro-SShield RMSc

interface

MountRMSc-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

open-emitter reflex

Mount the Bushnell MPO Pro-S

Shop Shield RMSc Picatinny mount on Amazonaffiliate Find Shield RMSc Picatinny mount on eBayaffiliate Shop Shield RMSc riser mount on Amazonaffiliate Find Shield RMSc riser mount on eBayaffiliate

The Bushnell MPO Pro-S is cut to the Shield RMSc footprint. To put it on a Picatinny rail you fit a RMSc-footprint Picatinny mount: the mount carries the Shield RMSc pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Bushnell MPO Pro-S. Match the mount to the Shield RMSc pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Bushnell MPO Pro-S footprint and mountthe optic
›Shield RMSc footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Bushnell MPO Pro-S on a Picatinny rail?

The Bushnell MPO Pro-S is a Shield RMSc open-emitter reflex, so it mounts on a Picatinny rail through an RMSc-footprint Picatinny mount. Buy the RMSc-footprint Picatinny mount, not a mount cut for any other footprint.