Can you run a Aimpoint Micro T-2 on a 20 mm RIS or RIS II airsoft rail? Yes, through its Aimpoint Micro-pattern Picatinny mount. The Picatinny-pattern fit and the clone-rail tolerance to check.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Aimpoint Micro T-2 on an airsoft RIS rail

Name: Fit a Aimpoint Micro T-2 on an airsoft RIS rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Aimpoint Micro T-2 is a Aimpoint Micro optic. Here is how it clamps a 20 mm airsoft RIS rail and the one thing to check on a clone rail.

Direct fitThe Aimpoint Micro T-2 runs on a 20 mm RIS or RIS II airsoft rail through its Aimpoint Micro-pattern Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.

OpticAimpoint Micro T-2Aimpoint Micro

seats on

RailAirsoft 20 mm RIS / RIS II railPicatinny-pattern; check clone tolerance

Fit readoutBench figures

Fitment

Optic type

tube red dot

Mount

Aimpoint Micro-pattern Picatinny mount

Dot size

2 MOA

Mount the Aimpoint Micro T-2 on airsoft

Shop Aimpoint Micro Picatinny mount for airsoft on Amazonaffiliate Find Aimpoint Micro Picatinny mount for airsoft on eBayaffiliate Shop Aimpoint Micro riser mount on Amazonaffiliate Find Aimpoint Micro riser mount on eBayaffiliate

A 20 mm RIS or RIS II airsoft rail is built to the Picatinny pattern, so the Aimpoint Micro-pattern Picatinny mount that carries the Aimpoint Micro T-2 on a live-fire rail clamps the replica rail the same way. The footprint choice does not change: it is still a Aimpoint Micro optic on a Aimpoint Micro mount.

The variable on airsoft is the rail, not the sight. A quality RIS or RIS II rail holds Picatinny slot width and pitch, but a budget clone rail can run slightly narrow or wide. Seat the mount dry, check the Aimpoint Micro T-2 sits square, and confirm the clamp locks before a skirmish so recoil-free cycling does not shake it loose.

Related fitments

›Aimpoint Micro T-2 on a Picatinny railthe live-fire case
›Aimpoint Micro T-2 footprint and mountthe optic
›Airsoft 20 mm RIS / RIS II railthe rail
›Aimpoint Micro footprintthe pattern

Questions and answers

Fit a Aimpoint Micro T-2 on an airsoft RIS rail?

The Aimpoint Micro T-2 runs on a 20 mm RIS or RIS II airsoft rail through its Aimpoint Micro-pattern Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.