How to mount a Aimpoint Micro H-2 on a Picatinny rail: it is a Aimpoint Micro tube red dot, so it takes a Aimpoint Micro-pattern Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Aimpoint Micro H-2 on a Picatinny rail

Name: Fit a Aimpoint Micro H-2 on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Aimpoint Micro H-2 is a Aimpoint Micro optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Aimpoint Micro H-2 is a Aimpoint Micro tube red dot, so it mounts on a Picatinny rail through an Aimpoint Micro-pattern mount or riser. Buy the Aimpoint Micro-pattern Picatinny mount, not a mount cut for any other footprint.

OpticAimpoint Micro H-2Aimpoint Micro

interface

MountAimpoint Micro-pattern Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

tube red dot

Height

Micro mounts set the height, from cowitness to 1.93 in

Mount the Aimpoint Micro H-2

Shop Aimpoint Micro Picatinny mount on Amazonaffiliate Find Aimpoint Micro Picatinny mount on eBayaffiliate Shop Aimpoint Micro riser mount on Amazonaffiliate Find Aimpoint Micro riser mount on eBayaffiliate

The Aimpoint Micro H-2 is cut to the Aimpoint Micro footprint. To put it on a Picatinny rail you fit a Aimpoint Micro-pattern Picatinny mount: the mount carries the Aimpoint Micro pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Aimpoint Micro H-2. Match the mount to the Aimpoint Micro pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Aimpoint Micro H-2 footprint and mountthe optic
›Aimpoint Micro footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Aimpoint Micro H-2 on a Picatinny rail?

The Aimpoint Micro H-2 is a Aimpoint Micro tube red dot, so it mounts on a Picatinny rail through an Aimpoint Micro-pattern mount or riser. Buy the Aimpoint Micro-pattern Picatinny mount, not a mount cut for any other footprint.