Scope Mount Finder

How to mount a Swampfox Liberty on a Weaver base: it is a Trijicon RMR / Holosun C open-emitter reflex, so it needs a Weaver-compatible Trijicon RMR / Holosun C mount, not a Picatinny one.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Swampfox Liberty on a Weaver base

The Swampfox Liberty is a Trijicon RMR / Holosun C optic. Here is the Weaver-compatible mount it needs and why a Picatinny footprint mount may not seat on a Weaver slot.

Direct fitThe Swampfox Liberty reaches a Weaver base through a Weaver-compatible RMR-footprint Picatinny mount. A Picatinny version of the same footprint mount may not seat, because its 5.23 mm recoil lug can be too wide for the 4.57 mm Weaver slot. Buy the Weaver-cut mount, or fit a Picatinny base first.
OpticSwampfox LibertyTrijicon RMR / Holosun C
seats on
RailWeaver rail4.57 mm slot, narrower than Picatinny
Fit readoutBench figures
Fitment
Optic type
open-emitter reflex
Mount
Weaver-compatible Trijicon RMR / Holosun C mount
Mount the Swampfox Liberty on Weaver
Shop Weaver-compatible Trijicon RMR / Holosun C mount on AmazonaffiliateFind Weaver-compatible Trijicon RMR / Holosun C mount on eBayaffiliateShop Weaver to Picatinny adapter base on AmazonaffiliateFind Weaver to Picatinny adapter base on eBayaffiliate

The Swampfox Liberty is a Trijicon RMR / Holosun C optic, so it needs a Trijicon RMR / Holosun C mount. On a Weaver base that mount has to be a Weaver-compatible version: Weaver slots are narrower and spaced differently from Picatinny, so a full-width Picatinny recoil lug may not drop in.

If the only Trijicon RMR / Holosun C mount you can find is Picatinny-cut, the cleaner fix is to replace the Weaver base with a Picatinny rail, then use the standard Trijicon RMR / Holosun C Picatinny mount. Check the mount clamps square before locking it down.

Related fitments

Questions and answers

Fit a Swampfox Liberty on a Weaver base?

The Swampfox Liberty reaches a Weaver base through a Weaver-compatible RMR-footprint Picatinny mount. A Picatinny version of the same footprint mount may not seat, because its 5.23 mm recoil lug can be too wide for the 4.57 mm Weaver slot. Buy the Weaver-cut mount, or fit a Picatinny base first.