How to mount a Sig Sauer Romeo-X Pro on a Picatinny rail: it is a Leupold DeltaPoint Pro open-emitter reflex, so it takes a DeltaPoint Pro-footprint Picatinny mount. Which mount to buy and the height to pick.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Sig Sauer Romeo-X Pro on a Picatinny rail

Name: Fit a Sig Sauer Romeo-X Pro on a Picatinny rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Sig Sauer Romeo-X Pro is a Leupold DeltaPoint Pro optic. Here is the mount that puts it on a Picatinny rail and the footprint it must match.

Direct fitThe Sig Sauer Romeo-X Pro is a Leupold DeltaPoint Pro open-emitter reflex, so it mounts on a Picatinny rail through a DeltaPoint Pro-footprint Picatinny mount. Buy the DeltaPoint Pro-footprint Picatinny mount, not a mount cut for any other footprint.

OpticSig Sauer Romeo-X ProLeupold DeltaPoint Pro

interface

MountDeltaPoint Pro-footprint Picatinny mount

seats on

RailPicatinny rail (MIL-STD-1913)5.23 mm slot, 10.01 mm pitch

Fit readoutBench figures

Fitment

Optic type

open-emitter reflex

Mount the Sig Sauer Romeo-X Pro

Shop Leupold DeltaPoint Pro Picatinny mount on Amazonaffiliate Find Leupold DeltaPoint Pro Picatinny mount on eBayaffiliate Shop Leupold DeltaPoint Pro riser mount on Amazonaffiliate Find Leupold DeltaPoint Pro riser mount on eBayaffiliate

The Sig Sauer Romeo-X Pro is cut to the Leupold DeltaPoint Pro footprint. To put it on a Picatinny rail you fit a DeltaPoint Pro-footprint Picatinny mount: the mount carries the Leupold DeltaPoint Pro pattern on its top and clamps the rail below, so the sight screws down to the pattern it was made for.

A mount cut for a different footprint will not take the Sig Sauer Romeo-X Pro. Match the mount to the Leupold DeltaPoint Pro pattern, and pick the mount height for the cowitness or heads-up hold you want on the rifle or carbine.

Related fitments

›Sig Sauer Romeo-X Pro footprint and mountthe optic
›Leupold DeltaPoint Pro footprintthe pattern
›How this footprint reaches a railthe general fit
›Picatinny rail (MIL-STD-1913)the base

Questions and answers

Fit a Sig Sauer Romeo-X Pro on a Picatinny rail?

The Sig Sauer Romeo-X Pro is a Leupold DeltaPoint Pro open-emitter reflex, so it mounts on a Picatinny rail through a DeltaPoint Pro-footprint Picatinny mount. Buy the DeltaPoint Pro-footprint Picatinny mount, not a mount cut for any other footprint.