How to mount a CVLIFE WildHawk X on a Weaver base: it is a Trijicon RMR / Holosun C open-emitter reflex, so it needs a Weaver-compatible Trijicon RMR / Holosun C mount, not a Picatinny one.
Updated 05 September 2026.
Fit a CVLIFE WildHawk X on a Weaver base
The CVLIFE WildHawk X is a Trijicon RMR / Holosun C optic. Here is the Weaver-compatible mount it needs and why a Picatinny footprint mount may not seat on a Weaver slot.
The CVLIFE WildHawk X is a Trijicon RMR / Holosun C optic, so it needs a Trijicon RMR / Holosun C mount. On a Weaver base that mount has to be a Weaver-compatible version: Weaver slots are narrower and spaced differently from Picatinny, so a full-width Picatinny recoil lug may not drop in.
If the only Trijicon RMR / Holosun C mount you can find is Picatinny-cut, the cleaner fix is to replace the Weaver base with a Picatinny rail, then use the standard Trijicon RMR / Holosun C Picatinny mount. Check the mount clamps square before locking it down.
- ›CVLIFE WildHawk X on a Picatinny railthe Picatinny case
- ›CVLIFE WildHawk X footprint and mountthe optic
- ›Weaver railthe base
- ›Picatinny mount on a Weaver railwhy the lug matters
Questions and answers
Fit a CVLIFE WildHawk X on a Weaver base?
The CVLIFE WildHawk X reaches a Weaver base through a Weaver-compatible RMR-footprint Picatinny mount. A Picatinny version of the same footprint mount may not seat, because its 5.23 mm recoil lug can be too wide for the 4.57 mm Weaver slot. Buy the Weaver-cut mount, or fit a Picatinny base first.