Can you run a Bushnell RXS-100 on a 20 mm RIS or RIS II airsoft rail? Yes, through its DeltaPoint Pro-footprint Picatinny mount. The Picatinny-pattern fit and the clone-rail tolerance to check.

Updated 05 September 2026.

Scope Mount Finder / Every rail, tube and red-dot footprint

Fit a Bushnell RXS-100 on an airsoft RIS rail

Name: Fit a Bushnell RXS-100 on an airsoft RIS rail: published specification
Creator: Scope Mount Finder
License: https://creativecommons.org/licenses/by/4.0/

The Bushnell RXS-100 is a Leupold DeltaPoint Pro optic. Here is how it clamps a 20 mm airsoft RIS rail and the one thing to check on a clone rail.

Direct fitThe Bushnell RXS-100 runs on a 20 mm RIS or RIS II airsoft rail through its DeltaPoint Pro-footprint Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.

OpticBushnell RXS-100Leupold DeltaPoint Pro

seats on

RailAirsoft 20 mm RIS / RIS II railPicatinny-pattern; check clone tolerance

Fit readoutBench figures

Fitment

Optic type

open-emitter reflex

Mount

DeltaPoint Pro-footprint Picatinny mount

Dot size

4 MOA

Mount the Bushnell RXS-100 on airsoft

Shop Leupold DeltaPoint Pro Picatinny mount for airsoft on Amazonaffiliate Find Leupold DeltaPoint Pro Picatinny mount for airsoft on eBayaffiliate Shop Leupold DeltaPoint Pro riser mount on Amazonaffiliate Find Leupold DeltaPoint Pro riser mount on eBayaffiliate

A 20 mm RIS or RIS II airsoft rail is built to the Picatinny pattern, so the DeltaPoint Pro-footprint Picatinny mount that carries the Bushnell RXS-100 on a live-fire rail clamps the replica rail the same way. The footprint choice does not change: it is still a Leupold DeltaPoint Pro optic on a Leupold DeltaPoint Pro mount.

The variable on airsoft is the rail, not the sight. A quality RIS or RIS II rail holds Picatinny slot width and pitch, but a budget clone rail can run slightly narrow or wide. Seat the mount dry, check the Bushnell RXS-100 sits square, and confirm the clamp locks before a skirmish so recoil-free cycling does not shake it loose.

Related fitments

›Bushnell RXS-100 on a Picatinny railthe live-fire case
›Bushnell RXS-100 footprint and mountthe optic
›Airsoft 20 mm RIS / RIS II railthe rail
›Leupold DeltaPoint Pro footprintthe pattern

Questions and answers

Fit a Bushnell RXS-100 on an airsoft RIS rail?

The Bushnell RXS-100 runs on a 20 mm RIS or RIS II airsoft rail through its DeltaPoint Pro-footprint Picatinny mount, exactly as on a live-fire Picatinny rail. On a good replica rail it clamps square; on a cheap clone rail, seat it dry first and confirm it locks, because clone rails can sit out of Picatinny spec.